For young children, textures and states of matter are important in their science lessons. Many of the pieces of furniture that are sold as science furniture are no more than a flat surface and four legs at an extreme price. For those ages that only need plastic tables, you don’t have to go to the expense of purchasing science furniture, just regular plastic furniture that is sturdy enough to support several kids leaning against it.

Chief among them are the classic “Punch and Judy” puppet shows held most afternoons in the park. Pompidou Center

Parc Asterix

Located about 20 miles north of Paris, Parc Asterix is the quintessential French theme park. Based on the French comic book character, Asterix the Gaul, the park is known for its many roller coasters and other Gallic-themed rides, such as a bobsled ride, water ride, and haunted mansion. Cite des Sciences et Industries

Part of the Parc de la Villette complex on Paris’ east side, the seven-acre museum has a full-scale model of the Mirage French jet fighter, a children’s Science City, and a series of hydroponic greenhouses. Paris Zoo

Located in the Bois de Vincennes on the southeastern edge of Paris, the Paris Zoo features a huge variety of animals, housed in natural-like settings without bars or cages.

In this experiment kids are going to look at how organic matter decomposes. Your kid will see that soil teems with life such as worms, slugs, millipedes and beetles that feed on the decaying matter. The decomposers are microscopic bacteria, fungi, woodlice, mites and small insects. This decomposing is the process where all organic material is turned into rich fertilizer for the growing plants in the soil.

This project actually consists of two easy science fair projects for the kids to do. The first your kid is going to look at the conditions needed for the decomposing process and in the second your kid is going to look at the decomposers.

Remember to make meticulous notes from your hypothesis to your conclusion and for your display purposes it is a good idea to take photos of each step as you go.

Having a look at the optimal conditions for the decomposing process:

What you need:

* A trowel
* Good soil
* Dead leaves
* Water and a watering can
* Two clean plastic containers, one with a tight lid
* Tags
* Pen
* Note book
* Camera
* Plastic gloves

This is what you have to do:

Wear your gloves for both of these experiments

1. Remember your notes and photos
2. Using your trowel fill the two plastic containers three quarters full with dry soil
3. Place a layer of dead leaves on top of the soil in both containers
4. Mark the container with the lid “A” and the other “B”
5. Now you water the soil and the leaves in your container marked “A” thoroughly and press the lid on
6. Keep the soil and leaves in the container marked “B” dry, do not add any water to it
7. Place both containers in a dry place and wait a few weeks
8. Have a look at both and you will notice that the leaves in the wet soil will have begun to rot while the leaves in the dry soil has dried and shriveled.

In the next experiment that is the second of our easy science fair projects for kids to do we are going to look at the decomposers.

What you will need:

* Once again your plastic gloves
* A plastic funnel
* A large clear jar with a neck into which the funnel will fit
* Some rotting leaves from a compost heap
* Black paper
* Sticky tape
* A desk lamp
* A magnifying glass
* A field guide
* A notebook
* A pen
* A camera

This is what you have to do:

1. The plan is to see the insects on the rotting leaves
2. You are going to separate them by using a lamp, a funnel and a large jar
3. Place the funnel in the jar
4. Wearing your gloves loosely fill the funnel with your rotting leaves
5. To keep out the light, you have to tape the black paper around the sides of the jar so it is dark inside the jar
6. Now you place the lamp in such a position that it shines onto the leaves in the funnel
7. What you want to happen is for the insects on the leaves to move away from the heat and light from the lamp
8. While doing so they will fall down the funnel and into the jar.
9. After an hour, take a way the lamp and remove the black paper from the jar
10. There will be several insects in the jar
11. Identify them by looking at them with the magnifying glass and the field guide
12. When you are finished, return them to where you found them and be careful not to kill them. These creatures are very important in the eco system of the earth!

As you can see, kids will be able to the most of the work in these two easy science fair projects for kids to do. The two combines should give you enough material for a good display.

In most instances, it is difficult to keep the children away from the computer and printer. A moth to the flame sort of condition exists with the computer being the flame. Unfortunately, many children have been burned by this flame through very little fault of their own. In many respects, however, there are responsible parties for children getting burned; with parents baring the brunt of the responsibility. Keeping the children busy at the computer is not a difficult task.

Print a hard copy

The statement that keeping children moving in the right direction on the computer is difficult is not to suggest that keeping them busy is difficult meaning hard. It does mean, however, that it is rather time intensive. If parents are not physically there to see what is coming out of the printer, their involvement is less powerful as a reinforcement technique. Finding activities on the computer that show a physical result is a primary key to keeping children busy on the computer. Living in cyber space may appeal to some but it is rarely reality and fraught with peril.

Unleash the artist

Most computers come with a painting package as part of the new computer bundle. Most of the time new owners are unaware that the package is even there. Take a look around the programs option and find it. Use it yourself first and introduce it to the kids early on. This is a great way to use the computer effectively, efficiently and safely.

Organization works

Most things on the computer and printer are based on an organized system. Try keeping your children busy by using the organizational structure that the computer brings. Have the child map out where all their games are or create a link file so they can store items in a place they can call their own.

Choosing the right games

There is just very little that you, as a parent, can do about the influx of all the video games on the market today. One way to get around the short comings of others who let their children use sometime unproductive video games is to introduce your children to a raft of other games before they are exposed to deleterious video games. The games you introduce could focus on team building and consensus rather than individual action.

Whatever you care to put into your young child’s head is the key to keeping them busy at a younger age. Once they find, often through other kids and the internet, some of the more typical games offered, your time keeping the children busy with the computer and printer is done. It is unfortunate to say; but this is the power that computers and their services bring. In most realities, all a parent can really hope to do is get their ideas into their children early before the onslaught begins.

Watch the video related to kids projects

Make this cute origami cat and broomstick for Halloween! Fold along with Tilly to see how it’s done. You can find a printable version of this origami project, as well as much more origami for kids, coloring pages, crafts, worksheets, printables and games at www.ActivityVillage.co.uk – Keeping Kids Busy!

Help answer the question about kids projects

About Author

This Article is written by John C. Arkin from PrintCountry.com, the contributor of Printer Ink Cartridges Articles. More information on the subject is at How to Keep your Kids Busy with Your Home Computer and Printer, and related resources can be found at kids project with printer.